Nebula Multipurpose Tool: Disinfectant Mister / Extractor / Detail Cleaner

DISINFECT EVERYTHING YOU MIST!

 
One machine that can both mist disinfectant and performs small extraction jobs in high traffic areas or upholstery. 
 
• Designed for use with all water-based disinfectants on the EPA \"List N\"
• Includes two brass spray tips - Fan Nozzle and Atomizing Nozzle
• Fan Nozzle - .25 Gallons Per Minute Rate
• Atomizing Nozzle - .05 Gallons Per Minute Rate
• Whisper quiet when in mist-only mode
• 3.5-gallon solution
• On-board storage for hoses, wands, and nozzles
• 35’ Misting Hose
• 18” Misting Wand
• 25’ power cord
• Built-in dolly with wheels features a collapsible handle for easy use and storage

ula Multipurpose Tool: Disinfectant Mister / Extractor / Detail Cleaner

How to Mist:

1. Add water and manufacturer’s recommended solution ratio into the solution tank. Fill only to the fill line indicated on the label on the inside of the solution tank.

2. Attach misting wand pressure hose to the quick disconnect in the pocket at the front of the machine.

3. Turn the 3-way switch to MIST ONLY setting. (Allow approximately 30 seconds for the pump to prime).

4. Use the wand with spray tip to spray the solution. The atomizing nozzle that is pre-installed on the wand applies the smallest micron-sized droplets and is perfect for most applications.

5. To apply use a natural up and down or side to side motion 18” from the surface, slightly overlapping from one section to the next. Do not dwell on a spot, as this will cause over-saturation.

6. Refill the solution tank, as recommended above, to resume cleaning.

• Recovery Tank

 

• 2.5 gallon

• Solution Tank

 

• 3.5 gallon

• Cord Length

 

• 25 ft.

• Vacuum Hose

 

• 10 ft.

• Weight (lb)

 

• 36

• Water Lift

 

• 89\"

• Coverage Per Tank

 

• 7,500 - 10,000 sq. ft. misting coverage per tank

• Misting Hose Length

 

• 35\' with quick disconnect

• Wand Length

 

• 18\"