HOT ! 150\' Red LED Rope Light, 2 Wire 1/2\", 120 Volt

Make a bold statement with our 150\' Red LED Rope Light. Deep, saturated red illumination makes this rope light perfect for patio accents, display lighting, signage borders, and architectural outlines that demand attention. From themed installations to seasonal accents, red rope light adds dramatic warmth and intensity to any space.

This 150-foot spool features a 1/2\" diameter, 2-wire PVC tube design rated IP65 for indoor and outdoor use. Operates at 120V, cuttable every 36 inches for custom lengths, with LEDs spaced every 1 inch. Dimmable with standard rope light dimmers. UL Listed. Draws just 0.8 watts per foot — 120 watts total for the full spool.

What\'s Included

• 1 Tube of Sealant


• 3 Five-Foot Power Cords (one pre-attached)


• 3 Power Cord Splice Pins


• 3 Splice Connectors and 6 Pins


• 3 End Caps


• 50 Mounting Clips

• 
  Heavy duty PVC tube — LEDs sealed and protected from weather


• 
  IP65 waterproof rated — safe for indoor and outdoor use


• 
  Cuttable every 36 inches for custom lengths


• 
  Dimmable with standard rope light dimmers


• 1/2\" diameter (13mm), 2-wire, 120V


• 
  0.8 watts per foot — 120 watts total for the full 150\' spool


• 
  Up to 100,000 hour LED life expectancy


• Backed by our Reindeer Proof™ Warranty
  

Frequently Asked Questions

Can I cut this rope light to a custom length?
Yes — this rope light can be cut every 36 inches for a custom fit. Always seal cut ends with the included end caps to protect the LEDs and maintain the IP65 rating.

How much rope light can I run on one plug?
Maximum 150 feet (one spool) per plug. Do not connect additional spools end-to-end to a single power source.

Is this rope light dimmable?
Yes — it\'s compatible with standard rope light dimmers for adjustable brightness.

Can I use this rope light outdoors?
Yes — it\'s IP65 rated, making it suitable for both indoor and outdoor applications.

Can I connect multiple spools end-to-end?
No — 150 feet is the maximum per plug. To cover a longer run, use the included splice connectors to join sections, with each section powered by its own dedicated power source.